Course in NATO Standards for Systems Interoperability
Online 300 h course in NATO standards for systems interoperability. 6 modules covering ADatP-34 (NISP, NATO interoperability standards and profiles), NATO Architecture Framework (NAFv4) and Sparx Enterprise Architect. Dedicated tutor and open enrolment.
Course in NATO Standards for Systems Interoperability — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$1,020 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the problem of interoperability between organisations and systems.
Apply technical interoperability standards to communications and data links.
Analyse models and formats for information exchange.
Identify the procedural and organisational aspects of interoperability.
Plan interoperability tests and certification processes.
Assess the interoperability maturity of a system.
Model the architecture of an interoperable system with NAF.
Who it's for
- Interoperability engineer who wants to specialise in NATO standards for systems interoperability.
- Systems architect who wants to specialise in NATO standards for systems interoperability.
- C4ISR systems integration engineer who wants to specialise in NATO standards for systems interoperability.
- Data link engineer who wants to specialise in NATO standards for systems interoperability.
- Interoperability certification manager who wants to specialise in NATO standards for systems interoperability.
- Standardisation analyst who wants to specialise in NATO standards for systems interoperability.
- Graduates in engineering or science seeking to enter the defence industry.
What you'll work with
- ADatP-34 (NISP, NATO interoperability standards and profiles)
- NATO Architecture Framework (NAFv4)
- STANAG 4586 (interoperability of unmanned aircraft systems)
- STANAG 5516 (Link 16)
- STANAG 4559 (ISR library)
- ISO/IEC/IEEE 42010 (architecture description)
6 modules · 300 h
1.1What it means for two systems to be interoperable1.2Levels: technical, syntactic, semantic and organisational1.3Standardisation agreements and their process1.4Document hierarchy and ratification1.5National reservations and their practical effect1.6Architecture frameworks and their role1.7Interoperability profiles1.8Actors and decision-making bodies1.9Field vocabulary and acronyms1.10Exercise: diagnose an interoperability failure
2.1Physical interfaces and connectors2.2Communication protocols and their version2.3Addressing and routing between domains2.4Gateways and protocol translation2.5Common time synchronisation2.6Quality of service between networks2.7Electromagnetic compatibility and spectrum2.8Power and energy standardisation2.9Interface documentation2.10Practice: specify an interface between two systems
3.1Shared data models3.2Dictionaries and controlled vocabularies3.3Message exchange formats3.4Common symbology and representation3.5Quality of the exchanged data3.6Schema mapping rules3.7Model version management3.8Information classification and release3.9Information exchange agreements3.10Practice: define the exchange of one message type
4.1Common operating procedures4.2Terminology and shared understanding4.3Joint training and accreditation4.4Interoperability exercises and their design4.5Working language and cultural barriers4.6Allocation of responsibilities among participants4.7Logistical and support coordination4.8Configuration management across organisations4.9Lessons learned and their incorporation4.10Practice: design an interoperability exercise
5.1Interoperability test plan5.2Test benches and joint laboratories5.3Phased testing and pass criteria5.4Interoperability certification and its scope5.5Conformity matrix against agreements5.6Interoperability maturity models5.7Indicators and their measurement5.8Management of deviations and exceptions5.9Improvement roadmap5.10Practice: conformity matrix for a system
6.1Selection of scenario and participants6.2Inventory of systems and applicable agreements6.3Gap analysis by interoperability level6.4Interface specification and data exchange6.5Proposed common procedures6.6Test and certification plan6.7Conformity matrix and improvement plan6.8Training and exercise plan6.9Technical report6.10Project defence
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and a dedicated technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Sparx Enterprise Architect, Cameo Systems Modeler, Wireshark, MATLAB, in free, academic or evaluation versions. Tests are studied using real interoperability test procedures between systems, NAF architecture modelling and interoperability maturity assessment. Assessment is continuous per module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the problem of interoperability between organisations and systems.
Apply technical interoperability standards to communications and data links.
Analyse models and formats for information exchange.
Identify the procedural and organisational aspects of interoperability.
Plan interoperability tests and certification processes.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme is 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You work with Sparx Enterprise Architect, Cameo Systems Modeler, Wireshark and MATLAB. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
SEIUM's own diploma on passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a Course or Postgraduate Diploma in the same area are recognised towards the higher programme. Check the recognition policy when you enrol.
Related programmes
Course in Ethics of Alternative Fuels in Defence
300 h online course in ethics of alternative fuels in defence. 6 modules covering Def Stan 91-091 (turbine aviation fuel), ASTM D7566 (aviation fuels with synthetic…
Course in Ethics in Academic Ergonomics Testing
Online 300 h course in ethics in academic ergonomics testing. 6 modules covering the WMA Declaration of Helsinki, Regulation (EU) 2016/679 (GDPR) and Siemens Jack. Dedicated…
DO-178C Aeronautical Software Certification Course Applied to UAS
Online 300-hour course in DO-178C aeronautical software certification applied to UAS. 6 modules covering DO-178C / ED-12C (software in airborne systems), Delegated Regulation (EU) 2019/945 (unmanned…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships