Course in Ethics in Military UAS Maintenance
Online 300-hour course in ethics in military UAS maintenance. 6 modules covering EMAR 145 (military maintenance organisations, EDA), EMAR 66 (military maintenance technician licences) and AMOS (Swiss AviationSoftware). Assigned tutor and open enrolment.
Course in Ethics in Military UAS Maintenance — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$868 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the airworthiness requirements applicable to military UAS.
Analyse human factors in maintenance and just culture.
Ensure the integrity and accuracy of maintenance records.
Assess safety risks associated with maintenance errors.
Resolve technicians' ethical dilemmas under operational pressure.
Apply safety management systems.
Design an ethical maintenance programme for UAS.
Who it's for
- UAS maintenance technician who wishes to specialise in Ethics in Military UAS Maintenance.
- Continuing airworthiness engineer who wishes to specialise in Ethics in Military UAS Maintenance.
- Maintenance quality manager who wishes to specialise in Ethics in Military UAS Maintenance.
- Human factors specialist who wishes to specialise in Ethics in Military UAS Maintenance.
- Aviation auditor who wishes to specialise in Ethics in Military UAS Maintenance.
- Operational safety manager who wishes to specialise in Ethics in Military UAS Maintenance.
- Graduates in engineering or sciences seeking to enter the aerospace industry.
What you'll work with
- EMAR 145 (military maintenance organisations, EDA)
- EMAR 66 (military maintenance technician licences)
- STANAG 4671 (UAV airworthiness requirements)
- Regulation (EU) 1321/2014 (continuing airworthiness)
- SAE AS9110 (quality in aviation maintenance organisations)
- ICAO Doc 9859 (Safety Management Manual)
- Law 31/1995 (occupational risk prevention)
6 modules · 300 h
1.1Initial and continuing airworthiness1.2European EMAR requirements1.3EMAR-145: maintenance organisations1.4EMAR-M and airworthiness management1.5UAS certification under STANAG 46711.6Components: airframe, engine, avionics and data link1.7Ground control station1.8Differences from manned aircraft1.9Airworthiness authority in Spain1.10Workshop: structure of a UAS maintenance programme
2.1The SHELL model and the 'dirty dozen'2.2Fatigue and shift work in operations2.3Pressure from fleet availability2.4Communication at shift handover2.5Maintenance errors and their prevention2.6Just culture and error reporting2.7Training and qualification of technicians2.8Maintenance in austere deployments2.9Lessons from maintenance-related accidents2.10Case study: UAS accident caused by an assembly error
3.1Technical records and traceability3.2Forgery of signatures and records3.3Unapproved and suspect parts3.4Counterfeit parts under SAE AS55533.5Configuration and change control3.6Embedded software and updates3.7Digital records and their security3.8Audits and inspections3.9Disciplinary and criminal consequences3.10Practical: audit of maintenance records
4.1Safety risk management4.2Safety management systems (SMS)4.3Third-party damage from in-flight failure4.4Test flights after maintenance4.5Lithium batteries and fire risk4.6Hazardous materials in workshops4.7Cybersecurity in maintenance4.8Predictive maintenance using data4.9Responsibility of the certifying staff member4.10Laboratory: risk analysis of a test flight
5.1Loyalty to the mission versus safety5.2Deferring defects to complete the mission5.3Hierarchical pressure and refusal to certify5.4Contractors and shared responsibility5.5Maintenance of armed UAS: debate5.6Confidentiality and transparency5.7Whistleblowing5.8Aviation codes of professional ethics5.9Staff wellbeing and mental health5.10Workshop: resolving dilemmas using real cases
6.1Selection of the UAS system6.2Analysis of the maintenance programme6.3Assessment of human factors6.4Records integrity plan6.5Error reporting system6.6Risk analysis6.7Code of conduct for the technical team6.8Training plan6.9Report and presentation6.10Final review with the tutor
How you'll learn
Fully 100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is AMOS (Swiss AviationSoftware), SAP PM, Microsoft Power BI, Microsoft Excel advanced, in free, academic or evaluation versions. Practical work is based on real maintenance-records audit procedures, human factors analysis using the SHELL model and case studies of maintenance incidents. Assessment is continuous, per module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Understand the airworthiness requirements applicable to military UAS.
Analyse human factors in maintenance and just culture.
Ensure the integrity and accuracy of maintenance records.
Assess safety risks associated with maintenance errors.
Resolve technicians' ethical dilemmas under operational pressure.
Where this takes you
Requirements
- No prior degree required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You work with AMOS (Swiss AviationSoftware), SAP PM, Microsoft Power BI and Microsoft Excel advanced. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An in-house diploma from SEIUM upon passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area count towards the higher-level programme. Please check the recognition policy when you enrol.
Related programmes
Course in ISO Standards for Infrastructure Decontamination
Online 300-hour course in ISO standards for infrastructure decontamination. 6 modules covering ISO 7503-1 (evaluation of surface contamination), ISO 11929 (characteristic limits in radiation measurements) and…
Course in Regulatory History of Armoured Vehicles in Europe
Online 300-hour course in the regulatory history of armoured vehicles in Europe. 6 modules covering Directive 2009/43/EC (intra-Community transfers of defence-related products), Common Position 2008/944/CFSP (export…
Course in Regulation in Critical Software Certification
Online 300-hour course in regulation in critical software certification. 6 modules covering DO-178C (software in airborne systems), IEC 61508-3 (functional safety: software requirements) and LDRA Testbed.…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships