Course in Ethics in Energy Infrastructure Cybersecurity
Online 300-hour course in ethics in energy infrastructure cybersecurity. 6 modules covering Directive (EU) 2022/2555 (NIS2), Directive (EU) 2022/2557 (resilience of critical entities) and DIgSILENT PowerFactory. Assigned tutor and open enrolment.
Course in Ethics in Energy Infrastructure Cybersecurity — studying from Australia
Defence is one of Australia's largest engineering employers, with major programmes in land systems, naval platforms, aircraft and integrated systems managed through the Department of Defence. Land systems engineering supports armoured vehicles, weapons and logistics equipment, often through prime contractors and local industry partners. Industry involvement is strongly encouraged through the Defence industry policy framework. Engineers work on sustainment, capability development, systems integration and safety assurance, typically in Canberra, Adelaide, Melbourne and regional defence precincts.
Fees for Australia: A$1,270 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
How does defence engineering recognition work in Australia?
Defence engineering in Australia is largely run through the Department of Defence and its industry partners, which set their own security clearance and qualification requirements. Engineers Australia is the professional body for accreditation. SEIUM's private qualifications are not accredited by these bodies, so recognition is for employers or the relevant body to decide.
Which Australian employers hire in defence and land systems?
Australia has defence prime contractors, the Department of Defence, and specialist land systems firms. Many of these roles require Australian security clearances, which depend on citizenship and background checks rather than course completion. Ask employers how they weigh private qualifications against experience and clearance requirements.
Is the course manageable with a job, and does it need a visa?
The programmes are 100% online and taught in English, so you can study from Australia without a student visa. Specialist courses take 300 hours, diplomas 800 and master's 1,900. An assigned technical tutor supports you, fees are payable in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Characterise energy infrastructure and its exposure to cyber risk.
Analyse real incidents and draw lessons learned.
Identify the ethical dimensions of cybersecurity in essential services.
Interpret the European and national legal framework for critical infrastructure.
Apply industrial cybersecurity standards to control systems.
Design proportionate protection and resilience strategies.
Produce an ethical and resilience assessment of an energy infrastructure.
Who it's for
- Industrial cybersecurity engineer looking to specialise in Ethics in Energy Infrastructure Cybersecurity.
- Critical infrastructure security manager looking to specialise in Ethics in Energy Infrastructure Cybersecurity.
- OT risk analyst looking to specialise in Ethics in Energy Infrastructure Cybersecurity.
- Electrical systems engineer looking to specialise in Ethics in Energy Infrastructure Cybersecurity.
- NIS2 compliance auditor looking to specialise in Ethics in Energy Infrastructure Cybersecurity.
- Incident response coordinator looking to specialise in Ethics in Energy Infrastructure Cybersecurity.
- Graduates in engineering or science looking to enter the electricity sector.
What you'll work with
- Directive (EU) 2022/2555 (NIS2)
- Directive (EU) 2022/2557 (resilience of critical entities)
- IEC 62443 (cybersecurity of industrial automation systems)
- IEC 62351 (security in power system communications)
- Delegated Regulation (EU) 2024/1366 (network code on cybersecurity for the electricity sector)
- Law 8/2011 (protection of critical infrastructure)
- ISO/IEC 27019 (information security for the energy sector)
6 modules · 300 h
1.1Electricity system: generation, transmission and distribution1.2Gas, oil and hydrogen networks1.3SCADA, DCS and PLC systems1.4Industrial protocols: Modbus, DNP3 and IEC 618501.5IT/OT convergence1.6Smart grids and distributed resources1.7Dependencies between critical infrastructure1.8Threats to energy systems1.9State and criminal actors1.10Case study: analysis of the 2015 Ukrainian power outage
2.1Stuxnet and the manipulation of industrial processes2.2Industroyer and the 2016 attack2.3Triton and safety instrumented systems2.4Ransomware attack on Colonial Pipeline2.5Attack on the KA-SAT satellite network in 20222.6Incidents in the European energy sector2.7Cascading effects on the population2.8Attribution and its difficulties2.9Common patterns in incidents2.10Workshop: timeline of an incident in an electricity network
3.1Impact on civilians of an energy attack3.2Hospitals, water and dependent services3.3Ethics of vulnerability disclosure in ICS3.4Offensive research and dual use3.5Responsibility of operators and manufacturers3.6Ethics of state cyber operations3.7Transparency versus security3.8Equity in protecting rural areas3.9Ethics of paying ransoms3.10Practice: a vulnerability disclosure dilemma involving a PLC
4.1IHL and installations containing dangerous forces4.2Protection of objects indispensable to the civilian population4.3Tallinn Manual 2.04.4UN norms on responsible state behaviour4.5NIS2 Directive and the energy sector4.6Directive (EU) 2022/2557 on the resilience of critical entities4.7Law 8/2011 on critical infrastructure4.8Network code on cybersecurity for the electricity sector4.9Legal liability after an incident4.10Case study: legal analysis of an attack on an electricity network
5.1IEC 62443 for automation systems5.2IEC 62351 security in electrical communications5.3NERC CIP as a reference5.4Purdue architecture and segmentation5.5OT network monitoring5.6Patch management in industrial environments5.7Response and recovery plans5.8Sector-wide crisis exercises5.9Information sharing and sectoral CSIRTs5.10Laboratory: segmentation of a simulated substation
6.1Selection of the infrastructure6.2Description of assets and dependencies6.3Threat analysis6.4Assessment of impact on the population6.5Ethical analysis of scenarios6.6Applicable legal framework6.7Protection and resilience measures6.8Response plan6.9Report and presentation6.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the enrolment window, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The software used is DIgSILENT PowerFactory, Wireshark, Zeek, MATLAB/Simulink, in free, academic or evaluation versions. Case studies are based on real procedures for analysing incidents in control systems, tabletop incident-response exercises and resilience assessments of electricity networks. Assessment is continuous, module by module, plus a final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Characterise the energy infrastructure and its exposure to cyber risk.
Analyse real incidents and draw lessons learned.
Identify the ethical dimensions of cybersecurity in essential services.
Interpret the European and national legal framework for critical infrastructure.
Apply industrial cybersecurity standards to control systems.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient command of Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 300 hours in total, spread over 3 to 5 months. That amounts to an average of 10 to 15 hours per week, compatible with full-time work.
You will work with DIgSILENT PowerFactory, Wireshark, Zeek, MATLAB/Simulink. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An own diploma from SEIUM on passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a Course or Postgraduate Diploma in the same area are recognised towards the higher-level programme. Check the recognition policy when you enrol.
Related programmes
NATO Interoperability Standards for Land Vehicles Course
Online course of 300 hours in NATO interoperability standards for land vehicles. 6 modules covering STANAG 4754 (NATO Generic Vehicle Architecture, NGVA), AEP-4754 (NGVA publication) and…
Course in Ethics of Civil Use of Military Energy
Online 300-hour course in ethics of civil use of military energy. 6 modules covering the Treaty on the Non-Proliferation of Nuclear Weapons (NPT), Directive 2013/59/Euratom (radiological…
Course on International Law on the Use of Nuclear Weapons
Online 300-hour course in international law on the use of nuclear weapons. 6 modules covering the Treaty on the Non-Proliferation of Nuclear Weapons (1968), the Comprehensive…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships