Course in Classic Agricultural Machinery Restoration
Online 300-hour course in classic agricultural machinery restoration. 6 modules covering Regulation (EU) 167/2013 (type-approval of agricultural vehicles), Royal Decree 1013/2009 (agricultural machinery registry, ROMA) and advanced Excel (parts inventory). Tutor assigned and enrolment open.
Course in Classic Agricultural Machinery Restoration — studying from Australia
Restoration of classic vehicles and heritage machinery is a valued pursuit in Australia, supported by active car clubs, museums and a dedicated enthusiast community. Engineers and skilled restorers work on historical preservation, parts sourcing, engine rebuilding and compliance with vehicle registration requirements. The heritage and collectable vehicle market supports specialist workshops, parts suppliers and appraisal services. Employers include restoration workshops, museums, specialist importers and heritage organisations.
Fees for Australia: A$1,270 (AUD), with instalments and employer sponsorship available.
Relevant bodies in Australia
Typical roles
Questions from Australia
Is this training recognised by any Australian heritage or automotive restoration body?
SEIUM qualifications are private and not accredited by any Australian national body or heritage authority. Recognition is decided by employers and individual clients. Heritage listings and vehicle registration are governed by state authorities, so check their requirements separately if they affect your work.
Which Australian businesses might employ restoration specialists with this training?
Classic car restoration workshops, heritage vehicle dealers, museums, and specialist parts suppliers are examples of Australian employers and clients in this area. Hiring decisions rest with each business. A strong restoration portfolio and practical experience are typically more persuasive than a private qualification.
Can I study from Australia while keeping my current work, and can it be funded?
Yes, the programmes are fully online and taught in English, so you can study from Australia without a student visa and around your existing work. Fees are payable in instalments, and employer sponsorship is possible. Check the total hours and build a schedule you can sustain.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Place historic agricultural machinery in context as technical heritage.
Restore petrol, paraffin and diesel engines of vintage tractors.
Repair transmissions, hydraulic systems and power take-offs.
Recover chassis, wheels and bodywork while respecting their original configuration.
Restore the electrical system and finishes with authenticity.
Apply safety measures when operating and displaying machinery.
Plan a complete agricultural machinery restoration project.
Who it's for
- Classic agricultural machinery restorer who wants to specialise in Classic agricultural machinery restoration.
- Mechanic for vintage tractors who wants to specialise in Classic agricultural machinery restoration.
- Agricultural hydraulics technician who wants to specialise in Classic agricultural machinery restoration.
- Curator of ethnographic and agricultural museums who wants to specialise in Classic agricultural machinery restoration.
- Organiser of historic machinery fairs who wants to specialise in Classic agricultural machinery restoration.
- Safety adviser for agricultural machinery who wants to specialise in Classic agricultural machinery restoration.
- Engineering or science graduates seeking to enter agricultural and ethnographic museums.
What you'll work with
- Regulation (EU) 167/2013 (type-approval of agricultural vehicles)
- Royal Decree 1013/2009 (agricultural machinery registry, ROMA)
- ISO 500 (tractor power take-offs)
- ISO 730 (three-point linkage)
- OECD tractor test codes (protective structures)
- Royal Decree 1215/1997 (work equipment)
- FIVA Turin Charter
6 modules · 300 h
1.1Tractors, rotary cultivators and towed machines1.2Eras and reference manufacturers1.3Heritage and ethnographic value1.4Identifying model and serial number1.5Documentation and period catalogues1.6Market and parts availability1.7Typical condition of an abandoned machine1.8Regulations for road use and work1.9Safety on machines without guards1.10Workshop: identification and file of a machine
2.1Petrol, paraffin and diesel engines2.2Single-cylinder engines and their particularities2.3Hand start and cartridge start2.4Carburettion and injection pumps2.5Magneto ignition2.6Water and air cooling2.7Engine rebuilding2.8Appropriate fluids and lubricants2.9First start and its procedure2.10Practice: rebuilding an engine assembly
3.1Clutches and gearboxes3.2Reduction gears and locks3.3Rear axle and brakes3.4Power take-off and its safety3.5Three-point hydraulic lift3.6Hydraulic pumps and cylinders3.7Leaks and circuit repair3.8Controls and linkages3.9Hitches and their standardisation3.10Practice: repairing the hydraulic circuit
4.1Chassis and mountings4.2Corrosion in sheet metal and cast iron4.3Mudguards, bonnets and grilles4.4Seat and driving position4.5Iron and pneumatic wheels4.6Period agricultural tyres4.7Ballast and counterweights4.8Repair and reproduction of parts4.9Dimensional checking4.10Practice: restoring a bodywork part
5.16-volt and 12-volt systems5.2Dynamo, regulator and starter5.3Work lighting5.4Factory paints and colours5.5Lettering and decals5.6Reproduction of plates and badges5.7Balancing authenticity and use5.8Preserving the patina5.9Documenting the applied finish5.10Practice: finishing plan for a machine
6.1Safe commissioning6.2Added protections and their reversibility6.3Demonstration work with the machine6.4Participation in fairs and rallies6.5Transporting the machine6.6Routine maintenance6.7Storage and conservation6.8Common restoration mistakes6.9Documented real cases6.10Final project: documented restoration of an agricultural machine
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and a assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Advanced Excel (parts inventory), Fusion 360 (part reproduction), Agisoft Metashape (photographic documentation), in free, academic or evaluation versions. Tests are studied through real review procedures for hydraulic systems and power take-offs, engine bench and field tests, and demonstrations of historic agricultural work. Assessment is continuous across each module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Place historic agricultural machinery in context as technical heritage.
Restore petrol, paraffin and diesel engines of vintage tractors.
Repair transmissions, hydraulic systems and power take-offs.
Recover chassis, wheels and bodywork while respecting their original configuration.
Restore the electrical system and finishes with authenticity.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient command of Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme consists of 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You work with Advanced Excel (parts inventory), Fusion 360 (part reproduction) and Agisoft Metashape (photographic documentation). Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official Ministry qualification.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
Course in Restoration of Historic Military Vehicles
Online 300-hour course in restoration of historic military vehicles. 6 modules covering Royal Decree 892/2024 (Historic Vehicles Regulation), the FIVA Turin Charter and advanced Excel (inventory…
Lost-Wax Micro-Casting Course
Online 300-hour course in lost-wax micro-casting. 6 modules covering ISO 8062-3 (dimensional tolerances of castings), UNE-EN 1982 (copper and copper alloys, castings) and ProCAST. Assigned tutor…
Course in Tempered and Laminated Glass for Classic Cars
Online 300-hour course in tempered and laminated glass for classic cars. 6 modules with UN Regulation No. 43 (safety glazing), ISO 3537 (safety glass: mechanical tests)…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships